Tactical Red/White L.E.D. configuration was designed as a tactical hands-free light source. The red L.E.D. is used for tactical applications when your night vision needs to be kept intact and your position needs to be concealed best as possible. The white L.E.D. is used for normal reading and writing when the amount of light output is not a concern. It is equipped with a 2 second activation delay to eliminate and chance of accidental activation of the white LED. Stealth is equipped with a 10 minute auto-off battery saving timer, Safety Strobe and a new auto-off override feature for hours of continual light when needed.

Features:

• High Strength CNC’d aluminum housing
• Water resistant O-ring housing with epoxy encased circuit board
• Instant On/Off with the push of a button
• Independent L.E.D. activation
• 10 minute auto-off timer with override function
• 2 second activation safety delay for NVG LED
• 120 ⁰ adjustable blacked-out L.E.D. bezel with anti-glare visor
• Non reflective anodized finish
• Safety Strobe (I.R. only)
• 360⁰ removable rotating clip
• 180⁰ adjustable L.E.D. arm
• Lifetime Warranty

Operating Functions:

• Red LED activation:
• 1st push turns on Red. L.E.D
• 2nd push turns off Red LED
• White LED activation
• Press and hold button down for 2 seconds to activate White LED
• 10 minute auto off timer
• Push button again to turn LED off

Strobe Function:

• While white LED is On. Press & hold button down for 2 sec. to activate Safety Strobe (no auto-off timer).
• Press button again to turn off strobe

Red LED Auto-Off Override Function:

• While strobing, press and hold button for 2 seconds. Strobe will stop and Red LED will activate, indicating *10 minute auto-off time deactivated*
• Push button again and Red LED will turn Off

White LED Auto-off Override Function:

• While override Red LED is activated, press and hold button for 2 seconds Red LED will turn off and White LED will activate, indicating *10 minute auto-off timer deactivated*
• Press button again and all LED will turn off
• Stealth will reset to factory operating functions after each use